ECX Ruckus Monster Truck RTR 179.99 (plus tax)

ECXRuckusThis is the rough an tough EXC Ruckus Monster Truck RTR 179.99 (plus tax)

This tough durable truck is perfect for bashing in the backyard! Plush suspension, bug soft tires make this truck great for jumping and capable of getting over some serious obstacles.  Perfect for the youngster and beginner.  Can be upgraded to LiPo and Brushless power for some serious bashing!  This is a great truck at a super low price! Come on down to the shop and check it out!

Here are the specs from ECXRC.com

When you’re in control of the Ruckus® Monster Truck you’re ready to rumble with the largest basher in the ECX® lineup. The Ruckus will tear through any neighborhood or backyard with ease and because of its bulletproof chassis and extremely durable powertrain, maintenance is a breeze. The included Spektrum™ 2.4Ghz transmitter and SR201 receiver provides extended range and interference free operation while the potent 15T Dynamite® motor gets the truck up to speed quickly. Thanks to the waterproof Spektrum SR201 receiver and electronics, the Ruckus can handle anything Mother Nature or the terrain throws its way with ease. The Ruckus® Monster Truck is a true ready-to-run vehicle that comes with absolutely everything included in one box—right down to the AA batteries.

Features

  • Completely ready-to-run with everything needed in one box
  • Pre-installed Dynamite® waterproof & LiPo compatible Tazer™ 15T ESC (For use with 2S LiPo batteries only)
  • Spektrum™ DX2E 2.4 GHz transmitter and waterproof SR201 receiver
  • Preinstalled Dynamite 15T motor
  • Dynamite 2-amp peak charger included
  • Dynamite Speedpack™ 1800mAh Ni-MH battery included
  • ESC and battery come pre-wired with high-current EC3™ connector
  • Waterproof Dynamite servo
  • Nylon composite chassis and parts material provide extreme durability
  • Upgraded driveshafts provide additional reliability even when pushed to the limits
  • Beginner-friendly battery retaining system means there are no body clips to lose
  • Adjustable oil-filled shocks provide great handling
  • 2WD transmission with gear differential makes it reliable and efficient
  • Transmission includes an adjustable slipper clutch
  • Fully-painted and -decaled body out of the box means it’s ready-to-run and looks good
  • Dynamite SpeedTreads™ Shootout™ wheels and tires provide relentless grip

ECX Torment Short Course Truck RTR $179.99 (plus tax)

ECXTormentThis is the durable and fun Torment Short Course Truck RTR Kit from ECX – $179.99 (plus tax)

This truck is for the new driver who wants to get into R/C Bashing or Racing!  This truck is tough and handles well with no bad tendencies on the track.  Many tracks use these trucks as rentals because they can take a good beat down! Perfect for youngsters and beginners.  Comes with everything you need in the box…battery, charger and 2.4gHz radio.  Upgraded to a lipo this truck is a blast to drive around the track!

Here are the specs from ECXRC.com

The ECX™ Torment™ SCT combines scale looks with features typically found in higher priced vehicles. The Torment takes the ECX vehicle lineup to the next level and includes a Spektrum™ DX2E radio system with SR200 receiver, providing users with extended range and interference-free operation. It also comes standard with ball bearings, oil-filled shocks, custom battery strap, battery and charger, providing users with yet another complete RTR package right out of the box.

Vehicle is fully ready-to-run, complete with all batteries needed, including the AAs.  All that needs to be done is charge the battery with the included charger.

The ECX RC Torment may be affordable, and it may be awesome looking, but it’s also super strong with a nylon composite material used throughout the chassis construction.  This gives it a high strength, high durability, as well as enough flexibility to withstand the punishment it was designed for.

Features

  • Spektrum™ 2.4GHz radio system including the DX2E transmitter and SR200 receiver
  • Dynamite® 20T motor and 12T ESC
  • Dynamite SpeedTreads™ Shootout™ tires and wheels
  • 2WD transmission with slipper clutch
  • All chassis parts made of a durable nylon composite
  • Full ball bearing-equipped
  • Adjustable oil-filled shocks
  • EZ battery retaining system
  • ROAR legal

 

 

E-Flight Blade 120 SR RTF

Blade120srMeet the Blade 120 SR! $129.00 (plus tax)

This heli is the perfect step up from a coax.  This bird you actually need to Fly!  Its about a third larger then the mCX2 and its a bit heavier so you can fly it outside. Its Fixed Pitch so you don’t have to worry about the collective.  It flies like you would control a heli on a video game.  Its perfect for the backyard, even goes good in a light breeze!  I have owned one of these for over a year and its definitely held up to more then a few rough landings.  Very durable and powerful for its size.  The coolest part is hearing the rotor wash from the 6.25” blades.  Come down to the shop and check it out!

Here are the specs from BladeHelis.com

Key Features

  • Sub-micro size
  • 100% factory-assembled, test-flown and ready-to-fly right from the box
  • Unique rotor head designed specifically to provide inherent stability of a coaxial helicopter, but provide the agile control of a single-rotor helicopter
  • Factory-installed 5-in-1 control unit with Spektrum™ 2.4GHz DSM2®-compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos
  • This model is one of the many available for the Phoenix RC Flight Simulator

Overview

The Blade® 120 SR heli has a fixed pitch that will give you the confidence to master the basics of single-rotor flight. Its unique rotor head was specifically designed to provide the inherent stability of a coaxial helicopter, but provide the agile control of a single-rotor helicopter. Modeled after the popular ultra micro-size Blade mSR heli, the sub-micro-size 120 SR heli is larger, faster and more powerful—which makes outdoor flight a reality.

It comes out of the box 100% factory-built and equipped with a factory-installed 5-in-1 control unit with Spektrum™ 2.4GHz DSM2®-compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos. A ready-to-fly version with 2.4GHz DSM2 transmitter and a Bind-N-Fly® version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both include a 1S 500mAh Li-Po battery and a single-cell, variable rate Li-Po charger as well as an AC power supply.

 

Product Specifications

Type: Sub-Micro Fixed-Pitch Single-Rotor Helicopter
Main Rotor Diameter: 12.5 in (318mm)
Gross Weight: 3.75 oz (106 g)
Length: 12.5 in (318mm)
Kit/ARF/RTF: RTF
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Indoor/Outdoor
Is Assembly Required: No

E-Flight Blade mCX2 RTF

BladeHeli2Meet the Blade mCX2! $99.99 (plus tax)

This little heli is perfect for the beginning pilot.  It has coaxial blades that spin in opposite directions to give it stability in flight.  So its gentle and easy to fly but it’s smooth, quick, has a full range of motion and is fully proportional.  Even the experiences pilot can have fun with this bird, it is FUN to fly.  It even has running lights.  Very durable and powerful for its size.  This is not like the mini helis at the mall…this one can rip and had full parts support.  Come on down to the shop to check it out!

Here are the specs from BladeHelis.com

Key Features

  • 100% factory-assembled, test-flown and ready-to-fly right from the box
  • Precision swashplate with user-selectable control settings
  • Factory-installed 5-in-1 control unit with Spektrum™ 2.4GHz DSM2®-compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos
  • Sleek new body and flashing LED lights
  • Coaxial, counter-rotating rotor head design
  • 120mAh 14C single-cell 3.7V lithium polymer battery pack
  • Powerful dual micro coreless motors
  • Full line of replacement parts available
  • MLP4DSM 4-channel transmitter equipped with Spektrum 2.4GHz DSM2 technology and digital trims

Overview

Like the original Blade® mCX heli, the Blade mCX2 heli is easy enough for anyone to fly and small enough to fly just about anywhere. The mCX2 heli has the same coaxial, counter-rotating rotor head design as the current mCX heli, but it adds an extra shot of excitement with user-selectable swash sensitivity and flashing LED lights that are built right into the body. The pilot can change the control settings to enable this heli to perform at higher speeds than the beginner settings. This helicopter also boasts heading lock-like performance for maximum control. It also boasts more powerful motors and a higher capacity 120mAh battery pack. The mCX2 heli is the ultimate beginner-friendly machine with unsurpassed stability, incredible control and extreme durability.

With a factory-installed 5-in-1 control unit with Spektrum™ 2.4GHz DSM2®-compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos come pre-installed. Freedom from frequency restrictions and great control are ensured with the MLP4DSM 4-channel 2.4GHz Spektrum technology-equipped transmitter. The ultra micro size and weight of the Blade mCX2 heli make it possible to fly this heli anywhere indoors.

It all adds up to more fun than you ever thought possible with a coaxial ultra micro heli, whether you’re a newbie or a pro.

 

Product Specifications

Type: Ultra micro coaxial helicopter
Main Rotor Diameter: 7.5 in (190mm)
Gross Weight: 1.0 oz (28 g)
Length: 7.9 in (200mm); Height: 4.7 in (120mm)
Motor Size: Micro coreless (2 installed)
Kit/ARF/RTF: RTF
Control System: 5-in-1 receiver/servos/mixer/ESCs/gyro (installed)
Minimum Age Recommendation: 14 years
Experience Level: Beginner
Recommended Environment: Indoor
Is Assembly Required: No

Kyosho Ultima RB6 2wd Buggy

RB6

Kyosho Ultima RB6 2wd Buggy

The new Ultima RB6 is the latest in the Ultima line of vehicles, which is a further development of the breed, and it includes all the enhancements that have been designed by Kyosho engineers and tested over the last year by Kyosho International factory drivers like Jared Tebo and legends of the RC world. This type of development, along with the uncompromising manufacturing standards and the vast experience that can only be gained from decades of high-level competition, makes the Ultima RB6 a strong choice as the car to beat for the 2013 season.

 

Features:

  • 7075 Machined hard anodized aluminum chassis with angled sides.
  • 2 motor layout setups included in kit – Rear 3 gear setup and Mid 4 gear setup.
  • Smart battery tray design Compatible with short, straight and saddle packs with both mid and rear motor setups.
  •  Long Wheelbase The chassis is now 13mm longer than the original RB5, giving you amazing stability.
  • Reversable rear gull-wing suspension arms allow for more agile turning and stability in bumpy terrain.
  • Velvet coated big bore shocks with new one piece alloy caps and X-Gear® springs.
  • X-Gear® diff lubricants
  • New high down-force “Blade” cab forward body
  • New Step 2.0 M rear wing
  • Super low CG design
  • New steering crank design.
  • All new front end geometry with adjustable caster blocks via inserts.

Associated T4.2

T4.2_FT_2560x2048_md

RC10T4.2 Factory Team Kit

1:10 Scale 2WD Electric Off Road Competition Truck Kit8-Time R.O.A.R. National Champion!

Since its release in 2003 the RC10T4 has remained at the top level of national competition having won eight R.O.A.R. National Championships. Along with this unprecedented achievement of winning more national titles than any truck in its class, comes countless hours spent of research and development to keep improving the T4.

The RC10T4.2 kit now comes with the latest Factory Team high-performance option parts like the 12mm “Big Bore” threaded shocks, VTS slipper clutch, blue aluminum bellcrank set and 12mm wheel hexes, just to name a few. Also included in the T4.2 Factory Team kit is the Pro-Line Bulldog body.

The T4.2 is a potent race truck and has everything it takes to get you to the top of the podium!

Features

  • Factory Team 12mm Big Bore hard-anodized aluminum threaded shocks with TiN “Gold” 3mm shock shafts
  • VTS slipper (variable torque, multi-plate slipper with three drive surfaces) assembly featuring a high-resolution spring
  • Factory Team 12mm blue aluminum front and rear clamping hexes with hex wheels
  • Pro-Line Bulldog body
  • Factory Team 7075-T6 blue aluminum 0° rear hubs with oversized outer bearing
  • Factory Team blue aluminum bellcrank set
  • Updated shock towers optimized for the 12mm Big Bore shocks
  • Ball differential with light-weight outdrives
  • Factory Team blue titanium turnbuckles
  • Factory Team carbon-fiber battery strap and blue aluminum thumb screws
  • CVA joints with pin retainer clips
  • Factory Team rear ballast weight
  • Complete set of precision ball bearings

 

 

 

 

Associated B44.2 & B4.2 In Stock!

Team Associated B44.2

B44.2_768x150

 

Features

  • Factory Team 12mm ‘Big Bore’ hard anodized aluminum threaded shocks with TiN “Gold” 3mm shock shafts
  • Updated 2.5mm carbon-fiber chassis +8mm optimized for LiPo saddle packs
  • VTS slipper (variable torque, multi-plate slipper with 3 drive surfaces) assembly featuring a high-rate spring
  • Composite battery trays allow for battery position adjustment with integrated spacers and quick-change battery straps
  • Updated 3.5mm front shock tower and 3.0mm rear shock tower designed specifically for the new 12mm shocks
  • Factory Team 12mm aluminum rear clamping hexes and rear hex wheels
  • Updated front top deck for increased rigidity featuring locking antenna mount
  • Factory Team 7075-T6 blue aluminum 0° rear hubs with oversized outer bearing
  • Updated front suspension arm for increased durability
  • Blue aluminum cam-type motor mount for easier and more secure gear mesh adjustments
  • JConcepts Finnisher +8mm body (clear) and Factory Team protective chassis tape included

 Team Associated B4.2

RC10B4.2_768x150

 

 

Features

  • Factory Team 12mm “Big Bore” hard anodized aluminum threaded shocks with TiN “Gold” 3mm shock shafts
  • VTS slipper (variable torque, multi-plate slipper with 3 drive surfaces) assembly featuring a high-resolution spring
  • Factory Team blue aluminum bellcrank set
  • Factory Team 12mm blue aluminum front and rear clamping hexes with hex wheels
  • Factory Team 7075-T6 blue aluminum 0° rear hubs with oversized outer bearing
  • +8mm B4 chassis and Pro-Line Bulldog +8mm body
  • Updated shock towers optimized for the 12mm “Big Bore” shocks
  • Ball differential with light-weight outdrives
  • Factory Team carbon fiber battery strap and blue aluminum thumb screws
  • CVA joints with pin retainer clips
  • Factory Team rear ballast weight
  • Factory Team blue titanium turnbuckles
  • Complete set of precision ball bearings
  • Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts, and much more!